Before Calling for Emergency Plumbing on Your Flooded Toilet

Your toilet is used daily. There is just no way around it unless you decided to go on vacation. You need your toilet to flush properly and without fail. Unfortunately, clogs happen, usually at the most inconvenient times, and worse of all when the toilet starts overflowing all over the place.

Once your toilet does start overflowing there isn’t much you can do in the way of preventing it, you just got to go with the flow. (Get it? Flow… ). Be sure you are prepared for the worst by following these emergency plumbing tips.

Stop it at the source

If your toilet starts overflowing, the immediate action that must be taken is to stop the flow of water coming from the toilet. In most bathrooms the best place to find this is the toilet’s main shutoff valve. You can most likely see the water line from your toilet to the bathroom wall, along with a handle somewhere along the line. If you don’t see it, it could be that your valve is behind a wall or below the floor tiles. If that’s the case you’ll want to talk to a plumber about modifications to gain access. Other than shutting the main water valve to your house off, the toilet valve is the only way to fully stop the flooding.

Because your valve most likely isn’t turned very often, it may be very sticky or rusted making it harder to turn. It’s a good idea to turn the valve every few weeks to ensure its easily accessible when the unthinkable does happen.

… And if that doesn’t work

If your toilet is overflowing and you can’t get the shutoff valve to turn, the next stop should be the inside of the toilet tank. Go ahead and remove the lid on top of the toilet, then check the flapper. If the flapper is open, reach in and close it manually. This should stop the flow of water.

If the flapper is not open, or if it won’t stay closed manually, find the float ball. This is the component that floats on the surface of the water and stops the tank from filling at a certain level. If you lift the float ball to the top of the tank, the water will shut off.

Vertical Platform Lifts Provide a Safer Option for Aging in Place

Vertical platform lifts that raise a wheelchair from the ground up to a porch, deck, or doorway are often the perfect mobility solution for those unable to climb stairs. Even if you have equipped your home to age in place, you may be challenged when entering and leaving the home.

The Slippery Slope of Ramp Safety

For many homes, adding a ramp is a perfect solution to increasing access, but ramps have two main shortcomings:

  • First, they must be the proper slope to be useful.
  • Unless covered, they can easily become slippery and dangerous.

According to standards set down by the Americans with Disabilities Act (ADA), a wheelchair ramp must have a slope with a ratio of no more than 1 to 12, which means that the ramp must be one inch long for every inch of rise. This means a 20 foot ramp for a 20 inch rise. For home use, the standards are a bit less stringent but still require a 2 to 12 ratio for the ramp, which means a 10 foot ramp for a 20 inch rise. Ramps need plenty of space. To make the ramp end in a convenient location, such as near where a person would need to be to access the car, it is often necessary to form a maze with one or more turning platforms to keep the slope in line with the recommended specs. Making ramps practical takes plenty of land.

When constructed at home, an uncovered ramp can become a personal ski slope. When snow, ice, or even rain make the ramp too slippery, a person descending it in a wheelchair might pick up speed and be thrown from the chair or sent beyond where they wanted to stop. When trying to wheel up the ramp, the process can be even more dangerous.

Vertical Platform Lifts Provide a Safer Solution

For many homes, a more practical solution is to install a vertical platform lift, a type of self-contained elevator that has sides but no top. With an entry door on one level and another door on a second-level, a person in a wheelchair and another person can ride between levels. Vertical lifts are often used for transportation up to six feet off the ground. While the unit needs a footprint of about four foot by six foot for a three by four platform, the amount of space required is less and is confined to a smaller, more compact part of the yard. Especially when the distance from the home to the ground is more than 24 inches, a platform lift has a much smaller footprint.

Many vertical platform lifts can handle up to 600 pounds. Made of powder coated materials, they can be topped with a domed roof or other coverage to make them more weather resistant. The device is equipped with safety features for easy operation, even by someone in a wheelchair. To prevent crashing into an obstacle, the lift features safety sensors in the base that will stop the lift if there is something in the way. It is also covered by ASME safety standards.

More costly than ramps, vertical lifts often cost between $4,500 – $6,500 plus installation costs. By comparison, it cost less than half of installing an elevator inside the home. While this is a sizable investment, vertical platform lifts represent an investment that you can easily amortize over the extra years that you or a wheelchair-bound family member can live in the home.

Hiring the Best Reliable Professional Concrete Cutting Company

In any construction or renovation process, concrete is considered as an essential material. Its strength makes it the most desired material in the construction industry. Unquestionable, you will need professional concrete cutting services at any point, so it is best to hire a reliable concrete cutter.

When new ideas emerge in the construction industry, it is required to cut or break already existing concrete structures. This method involves multiple tasks, such as cutting, drilling and sawing. Maybe it seems like an easy job to do, however, you should leave it to the professionals. Besides having the latest sophisticated equipment, technical expertise is needed, owned by highly trained workers.

Experience and work safety are two important things to look for among all concrete cutting companies. A company with more than 20 years of experience will definitely be your reliable partner. This company has professionals who oversee the work of the workers, so the job will be completed efficiently and safely. If you want to protect yourself from potential legal and financial risks, look for a company who has insured all workers who are doing the job.

Always make sure the concrete cutting company is having a legal license to perform the job. Even you can ask them to show you the license. If they refuse, you need to search for a new company. Recommendations from friends and relatives who hired concrete cutters must be considered. They may be the most reliable source when choosing the best concrete cutting partner. Another option for finding an expert in this field is to do Internet browsing. Just type “concrete cutters” in Google Search and choose few companies from the first page. The website should be extensive and full of information. Ask for a free quote and decide whether the company is reliable and professional according to the obtained quote.

Hiring a concrete cutting company is not expensive at all, considering the fact you will save yourself money and time. Do not run for companies offering low price services. They are more likely to do more harm than good. Unskilled workers, wrong selected tools and equipment and unsafe working are the risks carried by these companies. Тhere is a growing number of cases when people were deceived by such companies. It’s better to spend more time researching the best concrete cutting company, rather than tackling the problems that a bad company can bring to you.